Casing and Liner Running Procedures

Casing and Liner Running Procedures 1. General Running Procedure

1. Visually check each joint of casing/liner to ensure all joints are clear of foreign matter, measured and drifted.

Note: To prevent foreign matter entering the string whilst running it is necessary to:

  • use a casing/liner cover where appropriate
  • ensure dope is only applied to the pin end joint prior to make up.

2. Reduce the annular preventer closing pressure to less than the collapse rating of the casing/liner, if necessary.

3. Make up a . . .

Restricted Content

Subscribe to view the Content