Running and Setting Tie-Back Packer

Running and Setting Tie-Back Packer

The following is a procedure example for running and setting a weight set tie-back packer with a 7in liner.

1. Suspend tie-back packer in slips. Make up the running tool on a joint of drillpipe and stab into assembly. Rotate tool to engage lugs, then slack off and rotate the tool to the left 6-7 turns to engage the float nut. Back off the drillpipe joint.

2. RIH assembly on drill collars. Approximately 50 000 lbs slack off is required to set the packer. RIH, making . . .

Restricted Content

Subscribe to view the Content